Hofmann H26-3 Airspray 1k

---

HOFMANN type H26-3 universal road marking machine – for applying monocomponent airspray paint
Compact, narrow and manoeuvrable universal marking machine with high capacities for high capacity marking work, consisting of:
- hydraulic actuation, infinitely variable speed, acts simultaneously as a brake, speed
- 0-20 Km/h with 2 travel speeds (hydraulic motors have 2 travel speeds)
- front chassis composed of two parallel frames
- multi-disc electro-hydraulic parking brake
- Kubota Turbo Diesel engine 4 cylinders, 3800 cm³, water cooling and electric start, 55.4 kW (75HP) at 2200 rpm, soundproof,
- mechanical steering box, hydraulically assisted, with front axle steering
- screw compressor 2400 l/min. at 7.5 bars
- fuel tank with level indicator, capacity 150 liters, located in the safety area in front of the rear axle with left and right lateral filling
- hydraulic oil tank 85 liters
- alternator 100 A
- general battery switch
- multi-disc electro-hydraulic parking brake
- electric pedal switch
- engine/compressor cabin soundproofed and built on rubber pads to eliminate vibrations from the chassis
- operator and companion seats mounted on a shock absorption system and movable left/right including armrests
- control panel painted in gray RAL 7040
- the steering wheel can be moved to the left or to the right
- microbial tank: 2 x 160 liters with left/right shut-off valves, working pressure max. 3 bars
- control panel for the air unit located within easy reach of the operator
- marker with sliding support with the possibility of marking on the right, left and central side of the car
- front chassis composed of two parallel frames
- hydraulic equipment 15+8+8 cm³
- guide pointer (feeler) with hydraulic cylinder for lowering/raising
- TRANSLATOR + SUPPORT mounted on the rear axle
• PAINT TANK, total capacity 650 liters
- tank designed to work under pressure
- agitator with hydraulic drive
- washing system with galvanized tank of 20 liters, under pressure
- primary paint filter located after the tank exit
• MARKING UNIT, with variable sliding system, with the possibility of sliding on the right, central or left side of the equipment, depending on the type of marking applied, with support with rubber wheel and lifting cylinder, composed of:
- AIRSPRAY PAINT GUN complete with nozzles 6 mm paint nozzle, 9 mm air nozzle and shape nozzle = 2 (two) pieces
- REFLECTIVE PEARL GUN + ASSEMBLY KIT = 2 (two) pieces
- Manual gun L= 50 cm for monocomponent paint application with 10 m hose set
• SOLENOID VALVE – 2 pcs.
• FAN DRIVEN by a proportional hydraulic motor
The cooling unit is equipped with automatic adaptation of the fan speed depending on the ambient temperature and the demand of the equipment:
- reducing the noise level during normal load
- high cooling capacities at extreme demands of the equipment
• AUTOMATION SYSTEM type ELC-4: TFT display with a resolution of 800 x 480 pixels can control 3 guns and memorize 12 programs, distance between impulses 1 cm, work cycle up to 100m, automatic, semi-automatic, manual work mode, indicator liquid crystal speedometer, line length meter, forward/reverse recognition, pedal.
• 12V electrical equipment, beacon and 2 light arrow panels
• Folding rear platform
• Sun visor
• Front eyelet