Liebherr A 900 C ZW LITRONIC

---

RAIL-ROAD EXCAVATOR


Producer: LIEBHERR

Type: A 900 C ZW LITRONIC

Year of production: 2008

Hours: 16 976 mth

Gross weight: 22,500 kg

Engine: Liebherr D 934 S A6, 4 cyl., Turbo, 105 kW

Hydraulic lines for: grapple, ditching bucket, hammer, shears

3 x piece Arm

4 hydraulic supports

Central lubrication

Reversing camera

Air conditioning

Equipment:

- hydraulic ditching bucket, 2,000 mm wide

- towing bar

The excavator is adapted to work on railway tracks with a track gauge of 1,435 mm



Gross weight: 50 100 kg
King pin load: 18 000 kg
Axle load: 32 100 kg
Tare weight (+/- 3%): 12 193 kg
Pay load ca.: 37 907 kg
Gooseneck length: 3800 mm
Fifth wheel height loaded: 1250 mm
Rear gooseneck swing: 2300 mm
Loading length: 9300 mm
Extendable of: 6500 mm
Axle distance: 1360 mm
Loading height by max. load: 860 mm
Width: 2 540 mm
Suspension: -45/ + 145 mm

Included options
iKing pin 2"
iOne galvanised steel headboard, height ± 400 mm.
iRed and yellow air couplings on the galvanised front connection ledge.
i4 wheel chocks with carrier on the headboard. (± 5kg)
iOne spare wheel with holder on the headboard.
iElectrically operated hydraulic pump. (± 45kg)
Manual-steering, handling with cable remote control from the front and the back, with PDC-light
control for the realignement of the axles.
(without connection to the tractor).
i
iU-beam for ALU-ramps on the rear of the gooseneck with integrated fender. (± 56kg)
iReflectors (red or yellow) according to the EU regulation at the rear of the trailer.
Yellow reflective tape according to the EU regulation over the entire length, on the extension and
at the rear.
On the right and left under the gooseneck and at the ramps of the trailer one holder for the
warning boards and socket.
i
iHolder for one beacon light at the rear of the trailer.
iGalvanised landing gears at the rear under the loading platform.
Operated valve for ramps mounted on the right side.
Beacon on left side. (± 4kg)
i
iCover plates to bridge the clearance between ramps and loading area (± 17kg)
Cable for the the electric-hydraulic pump and/or electric winch (35 mm², 3.5 m length,
max. 250 A) between the semi-trailer and the truck with socket (NATO-NATO).
i
iA mud flap (www.MAX Trailer.eu) at the rear of the trailer.
iManual and description on USB stick .
iWe recommend to equip this trailer with a central greasing.
On the gooseneck removable sideboards and rearboard in alu ca. 2 400 x 400 mm (L x
H).
The galvanised rear stakes are dismountable.
(Length of the structure ca. 2 560 mm). (± 46kg)
i
4 pairs of WADER containerpockets in the loading platform for one 20', 2 x 20', 40'or 45'
container. (± 40kg)
i
7 pairs of pockets for stakes ca. 100 x 50 mm in the outer frame of the loading platform.
(± 21kg)
i
iGalvanised outriggers, extendable up to ca. 230 mm per side. (± 262kg)
i1st axle as liftaxle (depending on the load) lifting with air bag. (± 69kg)
Central greasing BEKAMAX (Pico) with NLGI-2 normal grease with removable
protection around the pump. (± 18kg)
i
4 warning boards ca. 423 x 423 mm extendable by. 400 mm with 1 LED position lights.(±
25kg)
i
iOn the warning boards a holder to put a flashing beacon.
i1 flashing beacon LED to provide separately.
iLoad manometer for the axle load including load graph.


CONTACT IN ENGLISH:

Kamil Szklarkowski
tel.+48 606 464 237
naczepy@wengrzyn.com

KONTAKT IN DEUTSCHE SPRACHE:

Jan Wengrzyn
tel.+48 604 529 320
jan@wengrzyn.com

Stock adress:
Jadwisin 24
59-516 Zagrodno
67th km of A4 motorway
Junction (Ausfahrt) "Jadwisin-Witkówek"